Product detail

DCS-1000B Series Digital Storage Oscilloscope

DCS-1000B Series

On sale

10M Point/ch Long memory, 1GS/s Sampling , 7inches WVGA LCD Digital Storage Oscilloscope

Related Products

Specification

●100MHz/70MHz/50MHz Digital Storage Oscilloscope
Waveform update rate up to 50,000wfms/s
256 color gradient 7inches WVGA display
10M memory depth per channel independently
1M FFT mathematical sampling analysis mode
Zoom In/Play and Pause Function
Diversified Trigger Functions
X-Y Mode Display
Go/NoGo Function
Data Log Function
Digital Filter Function
36 Measurement Parameter Selections

Rating

Type title Rating
 Vertical Vertical Sensitivity
Resolution
8 bit :1mV~10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy ±3% full sacle;2mV/div~10V/div
±4% full scale;1mV/div
Polarity Normal & Invert
Offset Position Range 1mV/div : ±1.25V
2mV/div ~ 100mV/div : ±2.5V
200mV/div ~ 10V/div : ±125V
Waveform Signal
Process
Plus, -, ×, ÷, FFT, FFTrms, User Defined Expression FFT: Spectral magnitude.
Set FFT Vertical Scale to Linear RMS or dBV RMS,
and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris
 Trigger Source CH1, CH2, CH3*, CH4*, Line, EXT**
*four channel models only. **two channel models only.
Trigger Mode Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width, Video, Pulse Runt, Rise & Fall,Timeout, Alternate,
Event-Delay(1~65535 events),Time-Delay(Duration, 4nS~10S), Bus
Holdoff range 4ns to 10s
Coupling AC, DC, LF rej., Hf rej., Noise rej.
Sensitivity 1div

External Trigger
(two channel
models only
)

Range ±2.5V
Sensitivity DC ~ 100MHz Approx. 100mV
100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal Time base Range 5ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum
Timebase Accuracy ±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate 1GSa/s max.
Record Length Max. 10Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2ns (typical)
Average selectable from 2 to 256
X-Y Mode X-Axis Input Channel 1; Channel 3* *four channel models only
Y-Axis Input Channel 2; Channel 4* *four channel models only
Phase Shift ±3° at 100kHz
 Cursors and
Measurement
Cursors Amplitude, Time, Gating available;
Unit:Seconds(s), Hz(1/s), Phase(degree), Ration(%)
  Automatic
Measurement
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low,Mean, Cycle Mean, RMS, Cycle RMS,
Area, CycleArea, ROVShoot, FOVShoot, RPREShoot,FPREShoot, Frequency, Period,
RiseTime, FallTime,+Width, -Width, Duty Cycle, +Pulses, -Pulses,+Edges, -Edges,
FRR, FRF, FFR, FFF, LRR, LRF,LFR, LFF, Phase
  Cursors measurement Voltage difference between cursors ( ΔV) Time
difference between cursors ( ΔT)
  Auto counter 6 digits, range from 2Hz minimum to the rated bandwidth
Control Panel
Function
Autoset Single-button, automatic setup of all channels forvertical,
horizontal and trigger systems, with undo Autoset
Save Setup 20set
Save Waveform 24set
 Display TFT LCD Type 7" TFT WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s),infinite persistence
Waveform Update Rate 50,000 waveforms per second, maximum
Display Graticule 8 x 10 divisions
Display Mode YT, XY
Interface USB Port USB 2.0 High-speed host port X1,
USB 2.0 High-speed device port X1
Ethernet Port(LAN) RJ-45 connector, 10/100Mbps Auto-MDIX (Only for 4 channel Models.)
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock
Miscellaneous   Multi-language menu Available
Operation Environment Temperature: 0°C to 50°C.
Relative Humidity ≤80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
Dimensions 380mmX208mmX127.3mm
Weight 2.8kg

Lineup

Related Accessories

Type name Content
GTP-070B-4

70MHz Bandwidth Probe

GTP-100B-4

100MHz Bandwidth Probe

GTL-246 USB2.0 Type A-Type B cable

Product lineup

TOP